Vishal Enterprises

The Fluke 393 FC CAT III 1500 V True-rms Solar Clamp Meter with iFlex is designed for solar photovoltaic (PV) installation technicians and maintenance professionals who work in high voltage DC environments: PV arrays, wind power, electric railways, data centers battery banks for uninterruptible power supplies. The clamp meter will measure up to 1500 V DC and 1000 V AC with test leads, and up to 999.9 A DC or AC through the clamp jaw. The included iFlex flexible current probe extends AC current measurements up to 2500 A. The 393 has a thin jaw, giving you access to cables in crowded combiner boxes. Plus, the test leads are designed with your work in mind, and are also rated to CAT III 1500 V DC.

• IP54 rated, ideal for work outdoors including PV panel testing
• DC power measurement, showing readings in kVA
• Audio Polarity indicator helps prevent accidental miswires
• Visual Continuity provides a bright green light in the display, ideal when working in dark and noisy environments
• Logging and reporting of test results via Fluke Connect software
• When measuring ac current the included iFlex flexible current probe gives you unparalleled access to cable is tight spaces.  The iFlex probe can be twisted through extremely small spaces and provide accurate current measurements.

Fluke 902 FC True-RMS HVAC Clamp Meter helps HVAC technicians work more efficiently on the work site.

The Fluke 902 FC Clamp Meter, with Fluke Connect wireless connectivity, can help HVAC technicians improve productivity in the field. The rugged dual-rated CAT III 600 V, CAT IV 300 V meter equips you to perform many essential HVAC system measurements: microamps for testing pilot light sensors; resistance up to 60 kΩ; AC current and AC/DC voltage; capacitance; and contact temperature, all with just one tool. Plus its small form factor makes it easy to hang on to and navigate in tight work spaces.

Part of the Fluke Connect wireless family

As part of the Fluke Connect family, the 902 FC can transmit measurements to a smartphone or tablet for later, detailed analysis. No need to write down the results. Trend and monitor measurements live on your phone screen, and upload those measurements to the cloud. Combine measurement data from multiple Fluke Connect test tools to create and share reports from the job site via email, and collaborate in real time with other colleagues with ShareLive™ video calls or email.

The 902 FC can also decrease the frequency of wearing personal protective equipment (PPE) when working on high voltage/current panels. Simply turn off the panel. Verify that it is de-energized using standard safety procedures. Place the clamp and synch it to a smartphone. Close the panel, reenergize it, and take measurements from a safe distance.

Other useful features:

• Ergonomic design fits in your hand and can be used while wearing personal protective equipment
• Large, easy-to-read backlit display improves readings in low light settings
• Connects to your smartphone via Fluke Connect so you can read measurements at a safer distance
• Measures AC current to 600 A and AC and DC voltage to 600 V
• Measures capacitance to 1000 µF and DC current to 200 µA
• Measures temperature from -10 °C to 400 °C (14 °F to 752 °F)
• Offers True-RMS voltage and current measurements to accurately measure non-linear signals
• Measures resistance to 60 kΩ
• Offers Min/Max recording to capture variations automatically
• Runs on two AA alkaline batteries

The Fluke 378 FC true-rms clamp meter uses FieldSense™ technology to make testing faster and safer, all without contacting a live conductor. You get accurate voltage and current measurements through the clamp jaw. Simply clip the black test lead to any electrical ground, put the clamp jaw around the conductor and see reliable, accurate voltage and current values on the display.

The 378 FC clamp meter includes a unique PQ function that senses power quality issues automatically. When making FieldSense measurements, the 378 FC will detect and display power quality issues, relating to current, voltage, power factor or any combination of the three. Now you can quickly determine if an upstream supply problem exists, or if there is a downstream equipment problem.

• Complete 3-phase voltage and current tests in 3 easy steps
• Full set of phase-to-ground and phase-to-phase values calculated and shown on the meter
• Values are also displayed on your smart phone and saved to the cloud via Fluke Connect software
• Phase rotation auto-calculated and shown on the Fluke Connect software
• No more hand-written notes or complicated math.

The included iFlex flexible current probe lets you measure ac current as high as 2500 A. Crowded wiring cabinets and large conductors are easily measured with the iFlex probe.

Your job will get easier when you use the 378 FC clamp meter. The display turns green when a stable FieldSense measurement is detected. Visual Continuity also provides a bright green screen for easy detection of continuity in noisy work areas.

With Fluke Connect software you can remotely log, trend and monitor measurements to pinpoint intermittent faults. Fluke Connect also allows you to gather data as the basis for a preventive maintenance program.

The Fluke 325 True-rms Clamp Meter is a reliable, versatile troubleshooting tool for commercial and residential electricians. Featuring a slim design for easy transport and use, and a large display for efficient troubleshooting. In addition to true-rms AC current and voltage on non-linear loads, the 325 measures:

• DC current
• DC voltage
• Temperature
• Frequency

You’ll carry fewer tools in your bag and get more work done.

The 325 gives you a strong combination of measurement functions, in a tool that is reliable, easy-to-use and affordable. This clamp meter offers True-rms AC voltage and current measurements on non-linear signals. Paired with the CAT III 600 V, CAT IV 300 V safety rating the clamp meter can also measure:

• Measures AC/DC current up to 400 A through jaw
• AC/DC voltage to 600 V using test leads
• Measures frequency from 5 Hz to 500 Hz; resistance to 40 kΩ
• Measures temperature from -10 °C to 400 °C with included K-type thermocouple
• Min/Max function records important values

The Fluke 368 FC true-rms leakage current clamp meter helps users detect, document, record and compare leakage current readings over time as a means of preventing unplanned downtime, and identifying intermittent GFCI and RCD trips, all without taking equipment off line.

The Fluke 368 FC has a large 40 mm diameter jaw for work with large conductors. The clamp’s jaw is fully shielded to accurately capture very small leakage signals, and to minimize external electromagnetic interference.

The 368 FC also offers wireless data connectivity via Fluke Connect. As part of Fluke Connect — the industry’s largest system of software and more than 40 wireless test tools — the 368 FC allows you to track changes in leakage current over time, helping to identify potential problems before they turn into major failures.

Designation :

The Fluke 376 FC True-rms Clamp Meter with iFlex is the most advanced troubleshooting tool for industrial and commercial electricians. The 376 is part of the Fluke Connect family of wireless test tools that enable you to log, trend and monitor measurements while remaining safely away from the arc flash zone through Bluetooth connectivity.

The 376 FC clamp meter uses an integrated low-pass filter for accurate measurements of non-linear signals, such as adjustable speed drives, electronic ballasts and other non-linear loads. The clamp also uses proprietary inrush measurement technology to filter out noise and capture motor starting current exactly as the circuit protection sees it.

Measure:

• Voltage to 1000 V AC or DC
• Resistance to 60 kΩ with continuity detection
• Min, max, average, and inrush recording to capture variations automatically
• 500 mV DC measurement range to interface with other accessories
• 1000 μF capacitance measurement

The 376 FC clamp carries a CAT III 1000 V, CAT IV 600 V safety rating, designed to offer you the highest possible protection in a test tool.

The included iFlex flexible current probe provides easier access to large conductors in tight spaces. The flexible probe:

• Expands the measurement range to 2500 A AC
• Allows frequency measurement to 500 Hz with body jaw and iFlex

Fluke 375 FC True-RMS AC/CD Clamp Meter measures very low voltage and very high resistance

The Fluke 375 FC, part of the Fluke Connect family of wireless test tools, delivers high performance features and ease of use. It features a VFD low-pass filter for accurate motor drive measurements and wireless communications to transmit results to a smartphone via Fluke Connect

The 375 FC offers most of the features of the Fluke 376 FC including compatibility with the iFlex flexible current probe but, unlike the 376 FC, it does not include the iFlex® probe in the package. You can measure AC and DC current to 600 A and voltage up to 1000 V with the fixed jaw clamp. Or connect an optional iFlex® flexible current probe to expand your measurement range to 2500 A AC. The large diameter and flexible design of the iFlex probe make it easier to measure around large conductors in tight spaces or to access individual wires.

Wireless connectivity improves productivity

Using its Bluetooth connectivity to Apple and Android devices, you can read the 375 FC results a safe distance away on your smartphone, wearing less PPE. You can create and send reports in email right from the field and save results to the cloud. You can also converse with colleagues in real-time with ShareLive™ video calls.

Versatile performance

With True-RMS AC voltage and current measurements, the 375 enables you to accurately troubleshoot non-linear signals. And you can log and trend measurements to pinpoint intermittents while you are performing other tasks. The Fluke 375 FC Clamp Meter is the direct replacement for the Fluke 375 Clamp Meter.

Other useful capabilities:

• Compatible with optional TPAK magnetic hanging strap
• Comes with batteries, soft carrying case, and three-year warranty
• Features CAT III 1000 V, CAT IV 600 V safety rating
• Measures capacitance to 1000 µF
• Includes True-RMS voltage and current measurements to accurately measure non-linear signals
• Measures frequency to 500 Hz and resistance to 60 kΩ with continuity detection
• Includes Min/Max/Avg and inrush recording to capture variations automatically
• Offers 500 mV DC measurement range to interface with other accessories
• Runs on two AA alkaline batteries

The Fluke 377 FC true-rms clamp meter uses FieldSense™ technology to make testing faster and safer, all without contacting a live conductor. You get accurate voltage and current measurements through the clamp jaw. Simply clip the black test lead to any electrical ground, put the clamp jaw around the conductor and see reliable, accurate voltage and current values on the display.

Use the included iFlex flexible current probe to measure ac current as high as 2500 A. The iFlex probe provides access to large conductors in tight spaces.

• Complete 3-phase voltage and current tests in 3 easy steps
• Full set of phase-to-ground and phase-to-phase values calculated and shown on the meter
• Values are also displayed on your smart phone and saved to the cloud via Fluke Connect software
• Phase rotation auto-calculated and shown on the Fluke Connect software
• No more hand-written notes or complicated math.

Your job will get easier when you use the 377 FC clamp meter. The display turns green when a stable FieldSense measurement is detected. Visual Continuity also provides a bright green screen for easy detection of continuity in noisy work areas.

With Fluke Connect software you can remotely log, trend and monitor measurements to pinpoint intermittent faults. Fluke Connect also allows you to gather data as the basis for a preventive maintenance program.

Expand Your Measurement Range with Increased Flexibility

You can measure around awkward sized conductors with the Fluke 376 True RMS Clamp Meter with iFlex®, expanding your measurement range to 2500 A AC. With True RMS voltage and current measurements, the Fluke 376 can read up to 1000 V and 1000 A in both AC and DC modes.

The Fluke 376 is the direct replacement for the Fluke 337 Clamp Meter.

Safety Conformance
EN/IEC 61010-1:2001; 1000V CAT III, 600V CAT IV

The Metravi CET-03B Clamp-on Earth and Ground Resistance Tester with Bluetooth is widely used in earth resistance measurement and loop resistance measurement in electric power, telecommunications, meteorology, oil fields, construction and industrial electrical equipment.

When measuring the grounding system of the loop circuit, there is no need to disconnect the grounding down lead or auxiliary earth electrode, and it enables safe and fast testing.
The tester can measure ground faults that cannot be measured by traditional methods, and can be applied to the site which cannot be measured by traditional methods, as earth resistance tester measures the comprehensive value of the grounding body resistance and the grounding lead resistance.

The Metravi CET-03B Clamp-on Earth and Ground Resistance Tester with Bluetooth has a long jaw which is suitable for the site of flat steel grounding. It can also measure leakage current grounding system and the neutral current.

The 325 gives you a strong combination of measurement functions, in a tool that is reliable, easy-to-use and affordable. This clamp meter offers True-rms AC voltage and current measurements on non-linear signals. Paired with the CAT III 600 V, CAT IV 300 V safety rating the clamp meter can also measure:

• Measures AC/DC current up to 400 A through jaw
• AC/DC voltage to 600 V using test leads
• Measures frequency from 5 Hz to 500 Hz; resistance to 40 kΩ
• Measures temperature from -10 °C to 400 °C with included K-type thermocouple
• Min/Max function records important values

Comes with a two-year warranty

• Battery-powered Hall-effect probe measures 1A to 400 A
• 1mV/Amp output guarantees easy reading on your meter
• Take accurate current readings without breaking the circuit
• Maximum conductor Ø 32 mm
• CAT III 600 V safety rating
• Also available with softcase for DMM and clamp (i410 kit)
• One year warranty

The Metravi Pro EV-C1 is a pocket-sized, compact Clamp Meter, especially designed for EV (Electric Vehicles).

With a super-wide range for measuring DC Amperes (4.000A to 1000A), it is capable of best accuracy (±1.5%±3dgts) for all ranges. It is a high-precision and solid AC/DC mini pocket-size clamp meter withTrue-RMS measurement capability.

Wide range, best accuracy, high resolution, one touch Zero adjustment, fast bar graph, Inrush current, non-contact voltage and frequency measurements, low pass filter, and more, make the Pro EV-C1 ideal for EV applications and the handy design makes it ideal for working in a crowded switch box or cable areas.

Clamp Jaw Dia 34mm, AC/DC Voltage, AC Current up to 300A, Resistance & Temperature. Pointer Lock Facility, with temperature probe.

The Metravi PRO Solar-3 is a professional T-RMS Industrial Clamp Meter with TFT Colour Display, featuring fast A/D Converter and high accuracy.

Makes it easy to find and solve problems in production equipment with Trend Capture and helps with Bluetooth data transfer & analysis reports using free App on your Smartphone.
Ensures safe measurements with double-moulded plastic housing, IP65 waterproof certification, CATIV 600V, CATIII 1000V & CATII 1500V categorisation.

Measures upto 1500V DC measurement, and hence, is most suitable for Solar and Photovoltaic Applications. In-rush current, VFD and LoZ measurement functions make it a must for all Motor Applications too.

Measure current up to 100 A without breaking the circuit with OpenJaw™ design. The T5-1000 Electrical Tester is a versatile troubleshooting tool to carry to every job site. Use it to check voltage, continuity, and current–all with one compact tool.

How to use the T5-1000

Just select volts, ohms, or current and the tester does the rest. The electrical tester auto-selects between AC and DC voltage up to 1000 V.

Plus, the OpenJaw™ design allows for fast and easy current measurements without needing to make metallic contact, just slide a wire into the open fork. The continuity beeper offers a quick go/no-go tests, resistance measurements to 1000 Ω.

The electrical tester comes with detachable Slim Reach probe tips so you can easily work in tight spaces. Or hand free work when you use the test lead holder to make the meter an “extended handle” for the probe.

Key safety features

An integrated protection circuit allows the tester to stay connected to a voltage source longer than a solenoid tester. The T5-1000 Electrical Tester also boasts:

A CAT III 1000V, CAT IV 600 V rating

Withstands a 10 ft. (3 m) drop.

The T5-1000 has and Auto-off mode to conserve battery life. The unit fits into an optional holster that attaches to a belt and neatly stows test leads.

Fluke T5-1000 vs T6-1000

The T5-1000 uses the OpenJaw™ design to measure current without metallic contact, just slide the wire in the open fork and the T5 will do the rest. It also measures voltage and continuity with the test leads. The T6-1000  is designed to use FieldSense™ technology to display both current and voltage simultaneously.

“This is a very good meter and I trust my life with it almost every day” - Kevin

Clamp Jaw Dia 34mm, AC/DC Voltage, AC Current 600A, Resistance & Temperature. Pointer Lock

• It confirms to the prescriptions of the European directive
• on low voltage 73/23/EEC and to EMC directive
• 89/336/EEC, amended by 93/68/EEC.
• Confirms to CAT-II 600V, IEC 1010-I (EN-61010-1)
• Clamp Jaw Dia :  34mm
• DC Voltage :  0 – 75V Accuracy :  ± 3%
• AC Voltage :  0 – 150V/300V/750V
• Accuracy :  ± 3%
• AC Current :  0 – 6A/15A/60A/150A/600A
• Accuracy :  ± 3%
• Resistance :  0 – 2K/200KΩ
• Accuracy :  ± 3%
• Temperature :  -20°C to 150°C
• Accuracy :  ± 3%
• Pointer Lock  Facility

The Triplett Model CM24 True RMS Mini Clamp Meter can measure AC and DC current to up 400A without breaking the circuit by clamping around a single conductor. This saves time and the circuit will not be damaged. True RMS provides better accuracy when measuring non-sinusoidal or noisy waveforms. Measurements can read on the 4000 count backlit LCD. It has an Inrush current function that captures the instantaneous surge (inrush) current when power equipment is turned on. Additional features include: a built-in NCV detector with LED, DC zero function, overrange indication, and Auto power off. Data Hold freezes the display for easy viewing.  CAT III-300V safety category. Includes 2 AAA batteries. 1-year warranty.

CM24-NIST Comes with Certificate of traceability to NIST standards 
Please add 11 business days lead-time for the NIST calibration process

• Auto Power Off. Data Hold. Auto-ranging. Clamp Jaw Size : 57mm. Display : 3-3/4 Digits 3999 Counts LCD.
• DC Voltage : 0 – 4/40/400/1000V; Accuracy : ±1.0%. AC Voltage : 0 – 4/40/400/750V, Accuracy : ±1.5%.
• AC Current : 0 – 400 / 2000A. Accuracy : ±2.5%.
• Resistance : 0 – 400/40k/400k/4M/40MΩ, Accuracy : ±1.0%. Frequency : 0 – 99.99/999.9/9.999k/99.99k/999.9kHz, Accuracy : ±1.0%. Diode test and Continuity Test.
• Confirms to CAT III 600, IEC 1010-1 and UL 3111-I. Standards Overload Protection of 500V DC/AC. RMS in Resistance, Frequency, Diode and Continuity Test Ranges.

5 Digits, 0.5% Accuarcy, Sources DC Current, Analogue Transducer & Loop Power and Measures DC Voltage, DC Current and Loop Current.

• 1μHz full-band resolution
• 5MHz~30MHz pulse waveform, adjustable rise/fall time
• 14-bit/16-bit vertical resolution
• Two equivalent-performance channels
• Max arbitrary waveform length of 8k/16M points; 48/161
• non-volatile waveforms storage

• 1μHz full-band resolution
• 5MHz~30MHz pulse waveform, adjustable rise/fall time
• 14-bit/16-bit vertical resolution
• Two equivalent-performance channels
• Max arbitrary waveform length of 8k/16M points; 48/161
• non-volatile waveforms storage

• High Accuracy Leakage Current tester
• Confirms to IEC 61010-1 (2001), IEC 61010-2-032 (2002), Installation Category II 600V Phase to Earth, Catergory III 300V Phase to Earth.
• Display: 3-1/2 Digits LCD Display 3200 Counts
• Range: 0 – 30m/300m/30A/300A (50/60Hz)
• Accuracy: ±1.2%
• Jaw Size: 40mm
• Over Range Indication
• Data Hold Function